WhatsApp

0086-13590592011

Plywood Edge Banding: The Ultimate Guide to Making Plywood Look Better

Views: 531     Author: Guangdong HSH DECOR Technology Co,.Ltd.     Publish Time: 2021-07-10      Origin: Guangdong HSH DECOR Technology Co,.Ltd.

Edge banding for plywood

Your perfectly optimized content goes here!

plywood edges

The best way to make plywood look better is with edge banding.

Plywood edge banding provides a perfect finishing touch for any piece of furniture or cabinet that you are building. There are many different types and styles of plywood edge banding, which can be confusing when you first start looking at the options available to you. In this guide we will cover all the basics so that you know what it is, how to use it on your project, and some tips on choosing the right type for your needs wood block.

- Plywood edge banding is a type of molding that goes around the outside edges on plywood. It can be made from different materials, but it's typically either wood or metal iron on edge banding

- You can use paint to give your edge banding a color, but you cannot stain plywood edge banding due to the smooth surface of the material. The best way to get an idea what colors will look good together for your project is by using colored pencils and drawing out possible combinations before you start painting them onto your piece commercial edge banding requires utility knife curved edges veneer edging

- Edge banding comes in three levels of thickness: narrow (less than ⅛"), wide (between ¼" - ½") and very wide (over ⅝"). If you wish to have a very subtle edge banding for your project, you need to make sure that it is narrow. However, if you prefer a more noticeable finish then wide or very wide will work best

veneer edge banding

- The cost of plywood edge banding ranges from $0.49 per linear foot up to about $20 per linear foot depending on the thickness and material used

Tip: When choosing a type of edge banding for your needs look at the durability level (heavy duty vs light duty), wear resistance (heavy vs medium) and adhesion strength required (medium vs heavy). This information should help guide what type of plywood edge banding you want to choose before making any purchases.

wood veneer

What is Plywood Edge Banding?

Plywood edge banding is a type of molding that goes around the outside edges on plywood. It can be made from different materials, but it's typically either wood or metal. Edge Bandings come in three levels of thickness: narrow (less than ⅛"), wide (between ¼" - ½") and very wide (over ⅝"). If you wish to have a very subtle edge band for your project, you need to make sure that it is narrow. However, if you prefer a more noticeable finish then wide or very wide will work best. The cost of Plywood Edge Banding ranges from $0.49 per linear foot up to about $20 per linear foot depending on the thickness and material used.

edge of the plywood

How to Edge Plywood:

- If you want your edge banding to have a smooths finish, then the best option is to use glue and clamp it for an hour before painting it or covering it with veneer. This will create a much smoother surface on plywood edge banding due to the lack of bumps in the top layer of material

cover plywood edges

- To attach wood edge bandings without nails (or screws), all you need are some clothespins and staples.

You can buy these at any hardware store and they're perfect because they work well for small pieces that would otherwise be difficult to nail down by hand as compared with larger projects like making plywoods edges look better where there's more room available for attaching them securely

- Stain your plywood edge banding and allow it to dry before putting on a second coat. This will create the appearance of a wood grains in the material

loose edge banding

Can you stain Plywood Edge Banding?

No, due to the smooths surface of plywood edge bandings, there is no way that water can get into any cracks or crevices which leads to stains not sticking as well. In order for something like paint or stain to adhere better and look more natural there needs to be some imperfections in the material so that they have something else with which they can stick other than just each other's top layer. It also helps if one side has been roughed up by sandpaper first so that it creates an uneven surface for the paint to stick to.

birch edge banding

What is Edge Banding?

Edge bandings are a type of molding that goes around the outside edges on plywood and other materials like MDF or particle board. As an edge band is applied, it creates a smooth finish along any exposed wood grain on your piece since they're typically made from hard plastic strips. This means you can make your project look better by applying edge banding so that all sides have this finish rather than just one side (or two). In order to get more detailed information about what kind of material you need for various projects, take some time out of your day to read our blog post!

edge banding process

Can You Stain Plywood Edge Banding?

No, due to the smooth surface of plywood edge bandings, there is no way that water can get into any cracks or crevices which leads to stains not sticking as well. In order for something like paint or stain to adhere better and look more natural there needs to be some imperfections in the material so that they have something else with which they can stick other than just each other's top layer. It also helps if one side has been roughed up by sandpaper first so that it creates an uneven surface for the paint to stick on .

raw edge banding

- Plywood Edge Banding: The Ultimate Guide To Making Plywood Look Better

- When choosing a type of edge banding for your need you should consider durability level (heavy duty vs. standard), thickness (narrow, wide or very wide) and cost

- Edge banding is typically made from hard plastic strips that create a smooth finish along any exposed wood grain on your project so it looks better. In order to get more detailed information about what kind of material you need for various projects, take some time out of your day to read our blog post!

- Plywood edge bandings are the perfect solution if you're looking for the finishing touch with plywoods edges because they come in three levels of widths: narrow (less than ⅛"), wide (between ¼" - ½") or very wide (over ⅝"). If you want a subtle look then use narrow; however, if you want a more pronounced look, then you may want to use wide or very wide edge bandings

red oak edge banding

- To attach wood edge banding without nails (or screws), all you need are some clothespins and staples. You can buy these at any hardware store and they're perfect because they work well for small pieces that would otherwise be difficult to nail down by hand as compared with larger projects like making plywoods edges look better where there's more room available for attaching them securely

- Edge bandings should always have a thicker bottom layer so it won't peel up when pulled from either direction along the grain of the material

- When choosing an edgebanding for your need consider durability level (heavy duty vs standard) thickness (narrow, wide, or very wide) and cost

commercial edge banding

- Edge bandings should always have a thicker bottom layer so it won't peel up when pulled from either direction along the grain of the material

- If you want to add an edgebanding to plywood without painting then use metal edging with adhesive backing. You will need enough for all four sides of your project plus one extra strip for each side that is running perpendicular to them in order to make joining easier by nailing down one side and finishing off on the other. When you're finished join both ends together using staples. However, if you plan on painting your plywoods edges there's no point in using this type because they'll be covered up anyway!

- You can paint over plywood edge bandings because they're made from an acrylic plastic. However, it's important to keep in mind that the paint will not stick as well so you may need to apply more coats and allow them time for drying

- You can stain plywood edgebanding if you want a darker color finish (especially on lighter colored woods). Just make sure that any type of uncovered wood is sanded down first before applying the new layer

- The best way to attach edgeline vinyl without using nails or screws is by stapling it into place with your staple gun over each row of lineal grooves.

solid wood

It takes about two hours per linear foot but once its done then all thats left to do are some finishing touches which include staining, sealing and installing your edgebanding

- Plywood edge bandings are made from high density acrylic plastic. The two most common types of plywoods that use this type are pre-finished melamine or unfinished (primed) lumber. You can also find them in a variety of colors including black, white, beige, brown and more

- When choosing an edgebanding for your need consider durability level (heavy duty vs standard) thickness (narrow, wide or very wide) and cost

- Plywood edge bandings come in three levels: narrow widths (less than ⅛"), wide (between ¼" - ½") and very wide (over ⅝"). If you want a subtle look then use narrow; however, if you want a more pronounced look, then you may want to use the wider or even thicker edgebandings


FAQ

  • Q Do you guarantee the safe and secure delivery of products?

    A Yes, we always use high quality export packaging. Double rolls packing film for export cargoes, suitable for shipment with container by sea.
  • Q What kinds of payment methods do you accept?

    A The most international payment methods are acceptable with us including Irrevocable LC at sight, 30% deposit in advance, 70% balance payable against B/L copyL copy.
  • Q What is the average lead time?

    A
    The average lead time is about 7 working days. For bulk quantity, for example 30,000KGS, it will take about 10 working days to finish production. The max lead time is 15 working days.
     
  • Q Can you supply the relevant documentation?

    A Yes, we have been exporting for a long time. Certificate of Analysis,Insurance Policy, Certificate of Origin and other required export documents are available.
  • Q What kind of package will you arrange?

    A
    For printed decor paper with FCL shipment, decor paper will be packed by rolls. For LCL shipment, decor paper will be packed with seaworthy pallets.
     

Quick Link

Contact Information

0086-13590592011

Get In Touch With Us

Contact us

If you have any questions, you can contact us through the form.

Copyright © 2021 Guangdong HSH Technology Co,.Ltd.    Support by Leadong粤ICP备17126595号-2